Lighting and Load Controllers

Our lighting and load controllers provide sophisticated management capabilities and can be directly connected to the following control products:

• Eaton C-H Smart Breaker panels with Pow-R-Command 1000 controllers
• Square D breaker panels with PowerLink G3 controllers
• Leviton ZMax panels

These products are connected to ADMMicro EMS controllers using local RS-485 serial data communications to provide energy managers with powerful integrated enterprise solutions for building energy monitoring and control. Integrating these products into an ADMMicro energy management system simplifies both initial installation and ongoing operation by eliminating the need to program site-specific schedules and operating parameters into individual lighting/load controllers as business conditions change. These parameters can be stored within the ADMMicro enterprise-wide system such that changes can be delivered to thousands of sites with just a few key strokes.

The ADM-LCP is a 24-circuit lighting/load control panel that is capable of controlling up to six zones and designed for use within the ADMMicro EMS. Each of the six, 4-pole contactors are easily replaceable and have a life expectancy in excess of 10 years, under normal operating conditions. Data communications with the EMS is via an ADM Remote Sensor Module serial link using the ModBus RTU protocol. "Failsafe" programming is built-in so that all contactors will automatically revert to the closed state (lights on) if data communications with the EMS are lost for an extended period (15 minutes by default). A photo sensor input is provided for monitoring of inside or outside levels.

The ADM-LCA provides the same capabilities of an ADM-LCP, excluding the six, 4-pole contactors. The LCA has been designed for applications where lighting/load contactors are already available or otherwise provided.